Mahr Federal Differential Electronic Level System

Hardware

Renishaw Equator	Renishaw Probing	Renishaw Stylus
CappsNC	GTI Vibration Analysis	Axiset Check-up
Renishaw XL80 Laser	Renishaw QC20 BallBar	Renishaw XR20 Calibrator
Ceramic Square	Ceramic Straightedge	Indicator Mounting Bracket with Fine Adjust
Mounting Post	Spindle Tram Bracket	ML10/XL80 Laser Mounting Kit
Square & Straightedge Leveling Kit	Differential Level System	Rotary & Off-Axis Calibration System
Spindle Anti-Rotation Kit	KOBA-Step® Gage	American Modular Tooling ®

	Mahr Federal Differential Electronic Level System The Mahr Federal Differential Level System operates simultaneously with a single 832 Amplifier, permitting comparison between two surfaces. The Mahr Federal Electronic Levels complement the Renishaw XL80 and XL80 Laser Systems, providing a suitable gage for measuring machine tool roll, pitch and yaw. The electronic levels are an excellent diagnostic tool. The electronic levels can be used to identify angular lost motion caused by loose gibs. The electronic levels can also be used to measure surface flatness and profile straightness. The built-in adjustable base permits setup on surfaces that are out of level or square by as much as +/- 1.5 degrees. The electronic levels complement the AG Davis Rotary Calibration System, enabling off-axis measurement of Trunion mounted rotaries and spindles.
	MD Calibrations LLC now offers a heavy duty; air tight, water tight storage/transportation case for the Mahr Federal Differential Electronic Levels. Case includes custom foam cutouts for the Differential Level Heads, 832 Amplifier, Mounting Plates along with a Lid Organizer providing storage for manuals and support equipment. The case also has built in heavy duty rollers with an extension handle making transportation of the case easy and convenient.
Each system includes: • One 832F amplifier with power module • Two EGH-2013-W2 electronic level heads with 6m/20ft cables • Two EAT-1029 adjustable bases • One ECB-1871 remote data entry hand switch with 6m/20ft cable • Two spindle mounting blocks utilizing 16mm/0.625 inch diameter bar for mounting. • One 9pin Null Modem RS232 interface cable • One USB to RS232 interface adapter MDC-1000-15 Mahr Federal Differential Electronic Level Kit with Molded Case MDC-1000-39 Mahr Federal Differential Level Kit with Heavy Duty Case MDC-2000-115 Case Only for the Mahr Federal Differential Level Kit
Top

Contact MD Calibrations today for updated price and delivery information on the Mahr Federal Differential Level System.

MD Calibrations, LLC is an authorized reseller of Mahr Federal Differential Electronic Levels.

Copyright 2003-2012 MD Calibrations, LLC. All rights reserved.
Designed by Image Advantages